You are here: The Products - About the windows - Sealing about the window - Silicone Alkoxy

Silicone Alkoxy

The blaugelb Silicone Alkoxy is a one-component sealant based on alkoxy that cures neutrally. Designed for outdoor use, the blaugelb Silicone Alkoxy is non-fading and also weather and UV-resistant. Thanks to its good initial adhesion, it can usually be applied without primer to almost all substrates encountered in construction. Skin formulation has been formulated to take place with a slight delay, for convenient processing.

Applications:
The blaugelb Silicone Alkoxy is especially suitable for sealing structural and construction joints as well as connecting joints between door/window frames and reveals made from masonry, concrete, plaster, cement etc., to meet the requirements of expert installation. The blaugelb Silicone Alkoxy can be used for sealing glass/frames with wood, rigid PVC and aluminium if compatibility with the system is assured.

Substrates:
Very good adhesion to the substrates normally encountered in building construction, such as concrete, porous concrete, plasterboard, plaster, masonry, fibre cement, wood, rigid PVC, aluminium, metals, GRP, etc. Do not use on PE, PP, PTFE. Incompatibility may occur on natural stone,
bitumen, tar or materials containing plasticisers (e.g. soft PVC, butyl, insulating coatings and foams, EPDM, APTK).

Product benefits:
 

  • Exceptionally suited for sealing of structural attachment, construction and expansion joints
  • Convenient processing thanks to delayed skin formation
  • Very good processability
  • Very good adhesion to almost all conventional construction materials*
  • Moisture and temperature-resistant
  • Non-fading, weather and UV-resistant once cured
  • Permanently elastic, compensates for unevenness and material movements
  • Non-corrosive
  • Virtually odourless
  • Very good coatability according to DIN 52452-A1
  • Building material class E (DIN EN 13501-1)
  • Tested to be very low in pollutants according to EMICODE EC1 Plus


*Carry out suitable pretests.

Show whole article

Close

Product name PU Item no.

blaugelb Silicone Alkoxy RAL 9016 white 310 ml

12 cartridges

0426583

blaugelb Silicone Alkoxy colourless 310 ml

12 cartridges

0426586

     

blaugelb Silicone Alkoxy RAL 9016 white 600 ml

12 bags

0426587

blaugelb Silicone Alkoxy colourless 600 ml

12 bags

0426589

Show all material numbers

Close

Material base:

1C polysiloxane (alkoxy)

Colour:

RAL 9016 white, transparent

Curing system:

Polymerisation by atmospheric humidity

Building material class:

DIN EN 13501-1

Class E

Curing speed:

At 20°C and 65% rel. humidity

Approx. 1.5-2 mm / 24 hrs.

Skin formation:

At 20°C and 65% rel. humidity

Approx. 15-20 minutes

Density:

DIN EN ISO 10563

1.03 g/ml

Shore A hardness:

DIN 53505

20 ± 5

Max. permissible deformation:

25 %

Change in volume:

DIN EN 15651-1:2012

Up to -10 vol.%

Elongation at break:

DIN 53504

600 %

Elastic recovery:

ISO 7389-B

> 80 %

Processing temperature:

Ambient: +5°C to +35°C

Substrate: +5°C to +35°C

Temperature resistance:

From -40°C to +150°C

Resistance:

Non-fading, UV and weather-resistant

Ecological report:

EMICODE EC1 Plus

Storage life:

12 months in unopened pack 
at +5°C to +25°C

Delivery form:

310 ml cartridge / 600 ml bag

Please choose a download: