You are here: The Products - Pre-wall installation Triotherm+ - Insulation - Insulation Wedge EPS
Insulation Wedge EPS
The blaugelb Insulation Wedge EPS is made from an EPS (expanded poly-styrene). The insulation wedges are sturdy, resistant and insensitive to moisture. Thanks to the material’s outstanding thermal conductivity of 0.04 W/m²K, thermal bridges are prevented/minimised. Because of its low density and ease of processing, efficient and economical installation is assured.
Area of application – upper connection:
The blaugelb Insulation Wedge EPS is also outstandingly suitable for ventilated facades and cavity-wall masonry. Here the blaugelb Insulation Wedge EPS can be fitted above the upper horizontal bar, on the one hand preventing/minimising thermal bridges at this point and on the other hand assuring proper water drainage through the slope of the blaugelb Insulation Wedge. After fitting the blaugelb Insulation Wedge EPS, a film that is watertight against driving rain from the blaugelb range is installed over it. This makes water traps in the upper connection a thing of the past.
For uses in the ventilated facade/cavity-wall masonry, the blaugelb Insulation Wedge EPS can be installed directly on the window frame/upper bar or alternatively in combination with the blaugelb Triotherm+ profiles.
Product benefits:
- 100 % recyclable
- 100 % HCFC, HFC and HBCD-free
- Enables sustainable construction thanks to reversibility of
- window sealing and fastening when renovating
- Low weight
- Thermally insulating
- Easy to use
- Resistant to ageing
- Insensitive to moisture
- Stable dimensions and volume
- Controlled water channelling around the upper connection
- Easy to process
- This product is Cradle to Cradle Certified® at the Silver level
Show whole article
Close
Product name | PU | Item No. |
---|---|---|
blaugelb Insulation Wedge EPS 50x50x1000 mm | 1 piece | 0427697 |
Show all material numbers
Close
Material: | EPS |
Colour: | Grey |
Fire behaviour: DIN EN 13501-1 | Class E |
Thermal conductivity nominal value ƛD: DIN EN 12667 | 0.031 W/m*K |
Water vapour diffusion resistance: DIN EN ISO 12572 | 30 - 70 µ |
Bending strength: DIN EN 12089 | ≥ 170 kPa |
Compression stress (10 %) compression: DIN EN 13163:2015-04 | ≥ 120 kPa |
Compression stress (2%) compression: DIN EN 13163:2015-04 | ≥ 25-40 kPa |
Dimensional strength: DIN ISO 75-1 | Short periods up to +95°C Long periods up to +80 to +85°C |
Water absorption after 28 days under water: DIN 12087 | 3 - 4 vol. % |
Compatibility with conventional building materials: | Compatible, except for solvents, |
Ageing resistance: | Mould-proof, does not rot |
Waste code: | Code no. 170604 |