You are here: The Products - Pre-wall installation Triotherm+ - Triotherm+ System - Hybrid Polymer Power Fix white

Hybrid Polymer Power Fix white

The blaugelb Hybrid Polymer Power Fix 600 ml white is a single-component permanently elastic sealant that is suitable for sealing expansion and connecting joints.

Formulated on the basis of a hybrid polymer, it exhibits particularly high initial adhesion and rapid full cure. The blaugelb Hybrid Polymer Power Fix 600 ml white is waterproof, weather and UV-resistant and also resistant to many chemicals. Thanks to its outstanding initial adhesion, it can usually be applied without primer to almost all – even wet – substrates encountered in construction. Because the blaugelb Hybrid Polymer Power Fix 600 ml white exhibits not only excellent sealing properties but is also particularly suitable for fastening components, the product is part of the pre-wall installation system blaugelb Triotherm+, where it is used as a sealant and adhesive for fitting the blaugelb Triotherm+ profiles, in conjunction with the triangular nozzle.

Applications: blaugelb Triotherm+ pre-wall installation system, sealing of connecting joints on windows and roller shutter cases, fastening and sealing in the metal and construction industry, for door frames, window sills, plates, panels, strips, wood constructions and insulating materials.

Substrates: Metals (steel, aluminium, brass, zinc etc.), plastics (poly-carbonate, PVC, ABS, polyamide, PMMA and GRP), cork, stone, enamel, glass, wood, HPL. Very well suited for concrete and cement-bonded fibreboard, sand-lime brick, hollow brick and porous concrete. The substrate should always be well cleaned for each application and not show any traces of release oil etc. Incompatibility (e.g. discolourations) may occur with natural stone. Do not use on PE, PP, PTFE or silicones.

Product benefits:
 

  • Outstanding initial adhesion on various substrates
  • Rapid full cure
  • High-performance sealing
  • Weather and UV-resistant, non-fading
  • System component of the tested pre-wall installation system
  • blaugelb Triotherm+
  • Exceptional final adhesion (320 kg/10 cm2)
  • Universally usable for sealing and fastening
  • Very good processability, moisture and temperature-resistant
  • Permanently elastic, compensates for unevenness and material movements
  • Silicone, isocyanate, solvent, halogen and acid-free
  • Non-corrosive
  • Virtually odourless
  • Exceptionally suited for time-critical application due to its fast
  • processability
  • Cured by atmospheric humidity from outside inwards
  • Very good coatability according to DIN 52452-A1*, can be painted over wet-in-wet
  • Suitable for all standard construction surfaces*
  • Building material class B2 (DIN 4102)
  • Tested to be low in pollutants according to EMICODE EC1 Plus

 

*Carry out suitable pretests.

Show whole article

Close

Product name PU Item no.
blaugelb Hybrid Polymer Power Fix 600 ml white 20 bags 0422030

Show all material numbers

Close

Material base:

1C hybrid polymer

Colour:

white

Curing system:

polymerisation by atmospheric humidity

Building material class:
DIN 4102-4

B2

Curing speed:

At 23 °C and 50 % RH

approx. 3 mm / 24 hrs.

Skin formation:

at 23 °C and 50 % RH

approx. 5 minutes

Density:

DIN 53479

1.47 g/ml

Shore A hardness:

DIN 53505

60 +/- 5

Max. permissible deformation:

20 %

Change in volume:

DIN EN ISO 105636

-3 to -4 vol.%

Tensile strength:

DIN 53504

3.5 N/mm2

Tensile shear strength:

DIN 53504

1.4 N/mm²

Modulus of elasticity 100 %:

DIN EN ISO 8339

2.3 N/mm²

Elongation at break:

DIN 53504

400 %

Elastic recovery:

ISO 7389-B

> 75 %

Solvent content:

free

Isocyanate content:

free

Processing temperature:

Ambient: 0 °C to +40 °C

substrate: 0 °C to +35 °C

Temperature resistance:

from -40 °C to +90 °C

Moisture resistance:

waterproof

Ecological report:

EMICODE EC1 Plus

Overpainting:

very good coatability 
according to DIN 52452-A1, 
can be painted over wet-in-wet

Storage life:

12 months in unopened pack 
at +5 °C to +25 °C

Delivery form:

600 ml tubular bag

Please choose a download: