You are here: The Products - The Products - FLK-Sealing-System - FLK Liquid Corner
FLK Liquid Corner
The blaugelb FLK Liquid Corner is a one-component liquid plastic based on polyurethane for localised sealing of floor-level elements in areas in contact with the ground, balconies and loggias in accordance with DIN 18531 and DIN 18533.
It is mixed with fibreglass fibres and thus has a firmer structure and increased stability, for example in hard-to-reach corners and grooves where the use of the seal with fleece reinforcement as the substrate is not possible.
The blaugelb FLK Liquid Corner is part of the blaugelb FLK Sealing System and is only intended for localised use, not for large-area sealing according to ETA.
Product benefits:
- Fibre reinforcement already included
- Stable, for localised use in hard-to-reach places
- 1C product, ready for use
- Solvent and isocyanate free
- Odourless, waterproof and highly elastic
- UV-resistant
- To be used especially with the products of the
- blaugelb FLK Sealing System
- Very good processability
- Moisture and temperature-resistant
- Suitable for standard construction surfaces*
- Building material class E (DIN EN 13501-1)
- Manufactured under an ISO 9001:2015-compliant quality system
* See “Substrate preparation” list, carry out suitable pretests
Show whole article
Close
| Product name | PU | Item no. |
|---|---|---|
| blaugelb FLK Liquid Corner 3,5 kg | 3,5 kg bucket | 9143750 |
| blaugelb Toolbox | 1 piece | 9143752 |
Show all material numbers
Close
| Processing temperature: | +5 °C to +40 °C 1 |
| Relative humidity for processing: | Min. 30 % |
| Stirring time: | Min. 2 minutes |
| Rainproof after: | Approx. 60 min ² |
| Can be coated over after: | Approx. 8 h ² |
| Cured after: | Approx. 2 days ² |
| Colour: | Traffic grey |
1 Substrate temperature must be at least 3 °C higher than the dew point
² at 23 °C, 50 % RH