blaugelb
Breathable Floor Protection Fleece
blaugelb Breathable Floor Protection Fleece is a high-quality, vapour-permeable surface protection that has been specially developed for temporary use on newly laid floors. This allows rising moisture and solvents to evaporate unhindered.
blaugelb Breathable Floor Protection Fleece consists of the following components:
The upper side is a multi-layer PE film
The fleece consists of densely needled polyester.
The underside has an anti-slip coating made of pressure-sensitive acrylate.
This processing gives blaugelb Breathable Floor Protection Fleece its waterproof and breathable properties.
blaugelb Breathable Floor Protection Fleece provides reliable surface protection against accumulated moisture (vapour-permeable), liquids of all kinds (waterproof), dirt and impacts. In addition, its anti-slip properties reduce the risk of falls and accidents.
blaugelb Breathable Floor Protection Fleece is easy to cut to size and, thanks to its laminated top surface, is easy to clean after use and can be removed without leaving any residue. If the underside is undamaged and clean, the product can be reused without hesitation.
The combination of materials ensures high mechanical strength and guarantees reliable protection for sensitive floor surfaces during new construction, renovation, and maintenance work.
It is particularly suitable for covering and protecting dry as well as newly laid* surfaces:
Tiled floors
Parquet and laminate flooring
Textile floor coverings/carpets
Kitchen areas and work surfaces
Ceramic and sanitary areas
* Before laying the product, observe the minimum drying time of the substrate.
- Vapour-permeable, allowing rising moisture and solvents to evaporate and preventing moisture damage
- Free from adhesives, solvents, and plasticisers
- Suitable for many surfaces, making it multifunctional
- Self-adhesive underside, without permanently sticking or losing adhesion
- Lint-free and very tear-resistant
- Lightweight, densely needled nonwoven material combined with a multi-layer waterproof PE film with vapour-permeable properties
- Time-efficient thanks to quick and easy handling
- Reliable surface protection against dirt and dust
- Anti-slip properties for increased work safety
- Sustainable and cost-efficient thanks to reusability when handled properly
| Material: | Polyethylene – polyester – pressure-sensitive acrylate coating |
| Thickness: ISO 9073-2 | Approx. 1.8 mm |
| Tensile strength MD, CD: ISO 9073-3 | > 100 N per 5 cm |
| Adhesive strength: | 8 N |
| Water vapour permeability: DIN ISO 12572 | 15 g/m² in 24 h |
| Processing temperature (substrate): | 5 °C to 40 °C (lower temperatures may reduce adhesive strength) |
| Length: | 50 m |
| Width: | 1 m |
| Colour: | White |
The information provided in this document corresponds to the information and technical details available to the best of our knowledge. However, this does not constitute a guarantee pursuant to section 443 of the German Civil Code (BGB). Our processing instructions are to be considered only as general guidelines and may differ in the individual case due to the range of possible uses and applications. They do therefore not automatically exempt the user from carrying out their own tests. We reserve the right to make technical modifications and enhancements at any time.