You are here: The Products - Chemical products - Sealants - Silicone Oxym
Silicone Oxym
The blaugelb Silicone Oxym is a one-component sealant based on oxym that cures neutrally. Designed for outdoor use, the blaugelb Silicone Oxym is non-fading and also weather and UV-resistant. Thanks to its good initial adhesion, it can usually be applied without primer to almost all substrates encountered in construction. It exhibits no embrittlement, chalking or hairline cracks and is non-corrosive.
Applications:
The blaugelb Silicone Oxym is especially suitable for sealing structural and construction joints as well as connecting joints between door/window frames and reveals made from masonry, concrete, plaster, cement etc., to meet the requirements of expert installation. blaugelb Silicone Oxym can be used for sealing glass/frames with coated wood, rigid PVC and anodised aluminium if compatibility with the system is assured.
Substrates:
Very good adhesion to the substrates normally encountered in building construction, such as concrete, porous concrete, plasterboard, plaster, masonry, fibre cement, glass, coated wood, rigid PVC, aluminium, metals, GRP, etc. Do not use on PE, PP, PTFE. Incompatibility may occur on natural stone, bitumen, tar or materials containing plasticisers (e.g. soft PVC, butyl, insulating coatings and foams, EPDM, APTK).
Product benefits:
- Exceptionally suited for sealing of structural attachment, construction and expansion joints
- No chalking, embrittlement or hairline cracks
- Very good processability
- Very good adhesion to most conventional construction materials*
- Moisture and temperature-resistant
- Non-fading, weather and UV-resistant once cured
- Permanently elastic, compensates for unevenness and material movements
- Non-corrosive
- Coatability according to DIN 52452-A1
- Building material class E (DIN EN 13501-1)
*Carry out suitable pretests.
Show whole article
Close
Product name | PU | Item no. |
---|---|---|
blaugelb Silicone Oxym RAL 9010 white 310 ml | 12 cartridges | 0426591 |
blaugelb Silicone Oxym colourless 310 ml | 12 cartridges | 0426592 |
blaugelb Silicone Oxym RAL 9010 white 600 ml | 12 bags | 0426593 |
blaugelb Silicone Oxym colourless 600 ml | 12 bags | 0426594 |
Show all material numbers
Close
Material base: | 1C polysiloxane (oxym) |
Colour: | RAL 9010 white, colourless |
Curing system: | Polymerisation by atmospheric humidity |
Building material class: DIN EN 13501-1 | Class E |
Curing speed: At 23°C and 50% rel. humidity | Approx. 2 mm / 24 hrs. |
Skin formation: At 23°C and 50% rel. humidity | Approx. 7 minutes |
Density: DIN 53479 | 1.03 g/ml (colourless) 1.25 g/ml (white) |
Shore A hardness: DIN 53505 | 22 ± 5 |
Max. permissible deformation: DIN EN ISO 11600 | 25 % |
Change in volume: EN 15651-1:2012 | Up to -10 vol.% |
Elongation at break: DIN 53504 | 600 % |
Elastic recovery: ISO 7389-B | > 90 % |
Processing temperature: | Ambient: +5°C to +35°C Substrate: +5°C to +35°C |
Temperature resistance: | From -60°C to +150°C |
Resistance: | Non-fading, UV and weather-resistant |
Storage life: | 12 months in unopened pack |
Delivery form: | 310 ml cartridge / 600 ml bag |